60mm ID Race Springs

Purchase 60mm ID Race Springs

H&R standardized I.D. Race Springs are the leading choice of motorsports professionals world wide. H&R 60mm I.D. Race Springs are wound from a special spring steel that has a higher tensile strength, providing clear performance to weight ratio advantages over competitive race springs. The special 54SiCr6 spring steel allows H&R 60mm I.D. Race Springs to be on average 15% lighter and have 10% more travel for any given spring rate due to its stronger, more resilient nature. Main springs range from 6" to 16" (25.4 mm = 1 inch) in length and are available in a wide selection of spring rates.

Purchase 60mm ID Race Springs

• Length (mm): 80 mm; 90 mm; 100 mm; 120 mm; 130 mm; 140 mm; 150 mm; 160 mm; 180 mm; 200 mm; 250 mm; 300 mm
• Rate (N/mm): 25 N/mm; 30 N/mm; 35 N/mm; 40 N/mm; 45 N/mm; 50 N/mm; 60 N/mm; 70 N/mm; 80 N/mm; 90 N/mm; 95 N/mm; 100 N/mm; 110 N/mm; 120 N/mm; 130 N/mm; 140 N/mm; 150 N/mm; 160 N/mm; 170 N/mm; 180 N/mm; 190 N/mm; 200 N/mm; 210 N/mm; 220 N/mm; 240 N/mm; 250 N/mm; 260 N/mm; 280 N/mm; 300 N/mm; 320 N/mm; 340 N/mm; 360 N/mm; 380 N/mm; 400 N/mm; 420 N/mm; 440 N/mm; 480 N/mm; 500 N/mm; 570 N/mm; 620 N/mm; 650 N/mm; 670 N/mm; 700 N/mm

Other suspension products in the vehicle type Race Springs:

2.5" ID Race Springs -- H&R standardized I.D. Race Springs are the leading choice of motorsports professionals world wide. H&R 2.50" I.D. Race Springs are wound from a special spring steel that has a higher tensile strength, providing clear performance to weight ratio advantages over competitive race springs. The special 54SiCr6 spring steel allows H&R 2.50" I.D. Race Springs to be on average 15% lighter and have 10% more travel for any given spring rate due to its stronger, more resilient nature. Main springs range from 6" to 16" (25.4 mm = 1 inch) in length and are available in a wide selection of spring rates.

60mm ID Tender Springs -- H&R standardized I.D. Race Springs are the leading choice of motorsports professionals world wide. H&R 60 MM" I.D. Race Springs are wound from a special spring steel that has a higher tensile strength, providing clear performance to weight ratio advantages over competitive race springs. The special 54SiCr6 spring steel allows H&R 60MM" I.D. Race Springs to be on average 15% lighter and have 10% more travel for any given spring rate due to its stronger, more resilient nature. Main springs range from 6" to 16" (25.4 mm = 1 inch) in length and are available in a wide selection of spring rates.